How to install a Blackout Shutter - bedroom blackout and shades

How to install a Blackout Shutter - bedroom blackout and shades

"
"I'm going to show you how to fit a blackout blind into a medium shutter frame that's already been fitted you need to drill some pilot holes in the side channel how many will depend on the height of the window normally one of the top middle and bottom i'm using a four millimeter metal drill bit there's a small groove in the center of the side channel this is where you

need to drill your holes next you need to fit the top brackets they're shaped in a right angle and the flat section of the back needs to go flush with the back of the frame fit the brackets about 80 millimeters in from the edge of the blind for why the windows you'll have extra brackets applied for the middle of the blind mark with a pencil where the screws are going to fit then

screw directly into the shutter frame at the top you're now ready to clip the blind into place tilt the front edge of the blind forward so the groove Clips under the front edge of the bracket then push the back edge of the blind into the back of the bracket slide the side guiding into place the smaller rounded part of the u-shaped channel should be towards the front screw the channel to the side of

the frame release the blind by pulling the cord at a slight angle and there we go easy to fit and easy to use perfect for cutting out the light during the day or for a good night's sleep

See more here: https://www.youtube.com/watch?v=-hHreyERtIU

eclipse blackout curtains

How to install a Blackout Shutter - bedroom blackout and shades""I'm going to show you how to fit a blackout blind into a medium shutter frame that's already been fitted you need to drill some pilot holes in the side channel how many will depend on the height of the window normally one of the top middle and bottom i'm using a four millimeter me...